- December 28, 2021
15 Mistakes To Avoid During Professional Heater Installation in Palm Harbor
Are you planning to install a new heater for your home? Or are you currently having any related work? If…
Are you planning to install a new heater for your home? Or are you currently having any related work? If yes, then there might be a high chance of errors. This article is going to mention those mistakes which can cause troubles during professional heater installation in Palm Harbor, FL.
1. Not hiring professionals:
If you are planning to install the heater yourself without taking help from experts, then it will take much more time and effort due to which there are higher chances of making mistakes in the process. So don’t try it on your own if you are not an expert or have no technical knowledge related to that work because it may harm you in the future too.
2. Not checking the gas leakage:
All types of heaters run on gas supply so make sure that there is no leakage in the gas line before you start the installation process. If there is any leakage, then it can be hazardous for you and your family. So, ensure to schedule the best heating services near me or in Palm Harbor, FL before starting the installation work.
3. Not reading the manual:
Heater installation manuals come with a lot of important information which is necessary to know before starting the installation process. If you don’t read it carefully, then there are higher chances of making mistakes that can ruin your heater or even cause an accident.
4. Not shutting off the electricity:
Before doing anything related to installation, make sure that you have shut off the main switch of electricity supply to your home. This is very important because if there is any kind of short circuit while installing the heater, it can be very dangerous for you and your family.
5. Not disconnecting the old heater:
If you are replacing your old heater with a new one, then make sure that you have disconnected it from the main supply. This is necessary because if there is any leakage in the old heater, it can damage the new one.
6. Not measuring the area:
Before buying a new heater, make sure that you have measured the area where you want to install it. This is very important because if you buy a heater which is too big or too small for your room, it will not work properly and will consume more electricity.
7. Improper wiring:
Wiring is an important part of the installation, so make sure that you have done it properly. Always hire professionals for this job because they know how to do it safely and quickly.
8. Not testing the heater:
After the installation process, don’t forget to test your new heater before switching on its main switch. This is very important because if there is any kind of problem with wiring or other things, then it will cause trouble for you.
9. Failure to maintain regularly:
Once you have installed a new heater in your home, be aware of its regular maintenance schedule so that you can save yourself from troubles like heaters not working due to lack of gas supply or leakage, etc. You can even buy maintenance services from reputed firms; however; always follow the instructions provided in the user manual.
10. Installing in an improper place:
If you are not aware of the place where you should install your new heater, then take help from experts or consult your user manual. Heaters must be installed in a place that is free from obstacles and has proper ventilation so that they can function properly and safely.
11. Not sealing the gaps:
Make sure that you have sealed all the gaps between the wall and heater with a good quality sealant so that there is no air leakage. This is necessary because if there is any leakage, it will reduce the efficiency of your heater and also increase your electricity bill.
12. Not using insulation:
Insulation is very important for heaters, especially for the ones which are installed in open areas. This is necessary because if there is no insulation, then it will consume more energy when the surroundings are cold.
13. Not checking for gas supply:
It is very important to check whether your heater has an uninterrupted gas supply or not before starting its installation process. If you don’t do proper planning, then it may cause trouble for you in the future too.
14. Not sealing around doors and windows:
Before closing doors and windows after installing a new heater, make sure that they have good quality seals so that air leakage can be reduced to minimum levels. This will increase the efficiency of your heater by saving energy consumption which will reduce your electricity bill as well.
15. Failure to turn off the heater after every use:
If you are using a gas-based heater, then make sure that you turn it off when not in use. This is very important because if there is any kind of leakage while the heater is on, then it may cause fire and accidents too.
So, these were 15 common mistakes that can be avoided during a professional heater installation. If you follow these instructions properly, then it will save your time and also increase the life of your heater too.
If you’re looking for a professional and experienced team to help with your heater installation, Xpress Quality Services can provide assistance. We have several years of experience in the industry, and we’re dedicated to providing quality heating solutions that meet your needs and budget. Contact us today at 813-819-8938 to learn more!